LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 151 (Power Steering System) >> Repair Instructions >> Steering Gear Cylinder Pipe Assemblies/O-Ring Seals Replacement - Off Vehicle (Quiet Valve) >> Disassembly Procedure

Disassembly Procedure

WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen both cylinder line fittings on the cylinder end of the gear assembly.
  2. Loosen both fittings on the cylinder line assemblies (1) at the valve end of the gear assembly.
    3. Fig 1: Identifying Steering Gear Cylinder Pipe Assemblies
    G01579924Courtesy of GENERAL MOTORS CORP.
  3. Remove both cylinder line assemblies (1) from the rack and pinion gear assembly (2).
  4. Remove the O-ring seals (1) from the valve end of line.
    Fig 2: Identifying Steering Gear Cylinder Pipe Assembly O-Rings
    G01579925Courtesy of GENERAL MOTORS CORP.
  5. Discard the O-ring seals (1).
scientia non olet · About LEMON Manuals