LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 151 (Power Steering System) >> Repair Instructions >> Power Steering Pulley Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the drive belt from the power steering pump. Refer to the following procedures DRIVE BELT REPLACEMENT - 2.2L (LN2) or DRIVE BELT REPLACEMENT - 2.2L (L61) or DRIVE BELT REPLACEMENT - 2.4L (LD9) .
  2. Remove the power steering pump from the engine. Refer to POWER STEERING PUMP REPLACEMENT (2.2L (LN2))  or POWER STEERING PUMP REPLACEMENT (2.2L (L61) & 2.4L (LD9))  .
  3. Remove the pulley from the power steering pump using the J 25034-C  .