LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 149 (Engine Mechanical - 2.4L (On-Vehicle)) >> Repair Instructions >> Engine Flywheel Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the new bolts or apply adhesive/Sealant compound GM P/N 123454493 or equivalent to all flywheel to crankshaft bolts that are being re-used.
  2. Carefully follow the instructions included with the thread locking compound to ensure proper bolt retention.
  3. Install the flywheel and the attaching bolts.
  4. Install the J 38122-A  .
    • Tighten bolts to 30 N.m (22 ft lbs).
    • Then rotate the bolts 45 degrees using J 36660-A. 
  5. For vehicle equipped with a manual transmission, install the clutch and pressure plate and clutch cover assembly.
  6. Install the transmission assembly. Remove the transmission assembly.
  7. Install the right engine splash shield.
scientia non olet · About LEMON Manuals