Installation Procedure
WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Install the tensioner and bolts. Tighten the drive belt tensioner bolts to 50 N.m (37 ft lbs).
- Install the A/C compressor.
- Install the A/C compressor mounting bolts. Tighten the bolts to 54 N.m (40 ft lbs).
- Lower the vehicle.
- Install the generator assembly.
- Install the drive belt. Refer to Drive Belt Replacement .