Installation Procedure
WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Install the crankshaft balancer.
- Install a NEW crankshaft balancer bolt.
- Use J 38122-A to prevent the crankshaft from rotating while tightening the crankshaft balancer bolt. Tighten the bolt to 100 N.m (74 lb ft) plus 75 degrees.
- Install the engine drive belt.
- Install the front fender liner.
- Install the front tire and wheel.
- Lower the vehicle.