Installation Procedure
WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Install the front transaxle mount.
- Install the front transaxle mount bolts.
Tighten
Tighten the bolts to 75 N.m (60 lb. ft).
- Install the front transaxle mount through-bolt.
Tighten
Tighten the bolt to 60 N.m (44 lb. ft).
- Install the left front fender liner.
- Install the left front tire and the wheel assembly.
- Remove the jack stand.
- Lower the vehicle.
- Install the washer solvent container.