Installation Procedure
WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Install the clutch master cylinder assembly to the clutch pedal assembly.
- Connect the clutch actuator cylinder line. See Figure.
- Install the remote reservoir. See Figure.
- Install the master cylinder retaining nuts at the front of the dash. See Figure.
Tighten
Tighten the nuts evenly to 21 N.m (15 lb. ft).
- Install the pushrod to the clutch pedal.
- Bleed the hydraulic system. Refer to Hydraulic Clutch Bleeding .