LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Engine Mechanical - 2.2L (LN2) (On-Vehicle)) >> Repair Instructions >> Valve Rocker Arm & Push Rod Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.

Important:  Whenever new rocker arms and/or rocker arm balls are being installed, coat the bearing surfaces of the rocker arms and the rocker arm balls with camshaft assembly lube GM P/N 1052365 or equivalent.

  1. Install the pushrods, making sure that they seat in the lifters.
  2. Install the rocker arms.
  3. Apply Dri-Slide Moly lubricant GM P/N 105248 (Canadian P/N 992926) or equivalent to the threads of the bolts.
  4. Install the rocker arm bolts. Tighten the nuts to 30 N.m (22 ft lbs).
  5. Install the valve rocker arm cover.
scientia non olet · About LEMON Manuals