Installation Procedure
WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Install the engine mount assembly.
- Install the nuts holding the mount to the body. Do not tighten.
- Install the bolts holding the engine mount to the bracket.
- Tighten the bolts to 60 N.m (44 ft lbs) + 90 degrees.
- Tighten the nuts holding the mount to the body to 75 N.m (55 ft lbs).
- Remove the J 28467-360.
- Install the coolant recovery tank.
- Install the A/C line (1) mounting nut.
- Install the cruise control module mounting nuts.