Installation Procedure
WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Install the engine front cover gasket.
- Install the engine front cover and the bolts. Tighten the bolts to 11 N.m (97 in lbs).
- Install the crankshaft pulley and the crankshaft pulley hub.
- Install the oil pan.
- Lower the vehicle.
- Install the power steering pump.
- Install the generator.
- Install the drive belt tensioner.
- Install the drive belt.