LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Engine Mechanical - 2.2L (LN2) (On-Vehicle)) >> Repair Instructions >> Drive Belt Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the drive belt.

    Important:  Make sure that the drive belt is aligned into the proper grooves of the accessory drive belt pulleys.

  2. Install the drive belt under the drive belt tensioner pulley by lifting or rotating the drive belt tensioner, using a breaker bar.
  3. Ensure that the drive belt is properly routed.
  4. Inspect the drive belt length scale on the drive belt tensioner for the proper installed length.
scientia non olet · About LEMON Manuals