LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Engine Mechanical - 2.2L (LN2) (On-Vehicle)) >> Repair Instructions >> Crankshaft Balancer & Hub Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Coat the front cover seal contact area with engine oil.
  2. Apply RTV sealer GM P/N 1052917 or equivalents to the keyway in the crankshaft.
  3. Install the crankshaft pulley hub using J 29113  .
  4. Install the crankshaft pulley and bolts. Tighten the bolts to 50 N.m (37 ft lbs).
  5. Install the crankshaft pulley hub bolt. Tighten the bolt to 105 N.m (77 ft lbs).
  6. Install the engine splash shield.
  7. Install the right front wheel and tire assembly.
  8. Lower the vehicle.
  9. Install the drive belt.
scientia non olet · About LEMON Manuals