Installation Procedure
WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Install the exhaust manifold gasket.
- Install the exhaust manifold.
- Install the exhaust manifold nuts. Tighten the exhaust manifold nuts to 13 N.m (115 in lbs).
- Install the oil fill tube.
- Raise the vehicle.
- Install the exhaust pipe to the manifold. Refer to Intermediate Pipe Replacement (2.2L) or Intermediate Pipe Replacement (2.4L) .
- Lower the vehicle.
- Install the generator rear brace.
- Install the generator.
- Install the oxygen sensor lead.