Balance Shaft Drive Chain Inspection
WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Clean the balance shaft drive chain parts in cleaning solvent. Remove the varnish, sludge and dirt.
- Inspect the balance shaft drive chain for the following conditions:
- Damaged links
- Worn or missing rollers
NOTE: Do not attempt to remove a link from the chain. The chain may be weakened and may fail, resulting in a loss of oil pressure and engine damage. - Replace the chain and sprockets if the chain tension cannot be adjusted to specification before the chain hits the housing or the guide comes to the end of its travel.