LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (Suspension System General Diagnosis) >> Diagnostic Information >> Wheel Bearings Diagnosis

Wheel Bearings Diagnosis

WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Tools Required: (J-8001) Dial Indicator Set
NOTE: The following procedure describes how to inspect the wheel bearing/hub for excessive looseness. If you are inspecting the wheel bearing/hub for excessive runout.
  1. Raise and support the vehicle.
    NOTE: If you are inspecting the FRONT wheel bearing/hub, support the front of the vehicle by the lower control arms in order to load the lower ball joint.
  2. Mount and secure the J 8001 to a stand. Ensure that the J 8001 contacts the vertical surface of the wheel as close as possible to the top wheel stud.
  3. Push and pull on the TOP of the tire. Inspect the total movement indicated by the J 8001.
  4. If the measurement exceeds 0.127 mm (0.005 in), replace the wheel bearing/hub. Refer to WHEEL BEARING/HUB .
scientia non olet · About LEMON Manuals