LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Power Brake Booster Check Valve And/Or Hose >> Removal (Second Design)

Removal (Second Design)

WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the brake booster vacuum check valve from the brake booster.
  2. If the vacuum check valve needs to be separated from the vacuum hose, release and reposition the clamp on the vacuum hose and remove the check valve from the hose.
  3. If replacing the vacuum check valve, remove the grommet from the brake booster and discard the grommet.
  4. If replacing the vacuum hose, release the vacuum hose connector retainer, then disconnect the connector from the vacuum port on the engine intake manifold. Take note of the vacuum hose routing, then remove the vacuum hose from the vehicle.
scientia non olet · About LEMON Manuals