LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Drum Brake Backing Plate >> Installation

Drum Brake Backing Plate: Installation

WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the brake backing plate. Install the wheel bearing/hub assembly.
  2. Install the wheel cylinder. See WHEEL CYLINDER  .
  3. Secure the rear park brake cable end fitting to the brake backing plate. Attempt to pull the park brake cable free of the backing plate, to ensure that the retaining tabs on the fitting are properly secured.
  4. Install the universal spring to the backing plate. Install the brake shoes. See BRAKE SHOES  .
  5. Adjust the drum brakes. See DRUM BRAKE ADJUSTMENT  in DRUM BRAKE SYSTEM under ADJUSTMENTS & INSPECTIONS.
  6. Install the brake drum. See BRAKE DRUM  .
  7. Bleed the hydraulic brake system. See BLEEDING THE BRAKE SYSTEM  . Install the tire and wheel assembly. Lower the vehicle.
scientia non olet · About LEMON Manuals