LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Disc Brake Hardware >> Removal

Disc Brake Hardware: Removal

WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the disc brake pads. See BRAKE PADS  .
  2. Remove the disc brake caliper bolts from the caliper assembly.
  3. Remove the caliper bushings from the brake caliper assembly, and discard the bushings.
  4. Inspect the caliper bushing bores in the caliper assembly. Remove any debris or corrosion from the bores.
  5. Inspect the bolts for rust, corrosion, and/or damage. If any of these conditions are present, replace the bolts.
scientia non olet · About LEMON Manuals