Removal & Installation (Cavalier)
WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Remove instrument panel trim pad. See INSTRUMENT PANEL TRIM PAD . Remove screws from top of instrument cluster. Remove instrument cluster by pulling rearward. Disconnect electrical connector from IPC. Remove IPC.
- To install, reverse removal procedure. Ensure IPC line up tabs are aligned with instrument panel. Tighten IPC mounting screws to specification. See TORQUE SPECIFICATIONS . Activate air bag system.