Zone 3
WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure ignition is off and key is removed. Connect driver-side air bag module connector. See Figure. Install Connector Position Assurance (CPA) clip.
- Install AIR BAG fuse (15-amp) in instrument panel fuse block. Install access panel on end of driver-side instrument panel. Staying well away from air bag modules, turn ignition on. Check system for proper operation. See SYSTEM OPERATION CHECK .