Zone 2 (Sedan)
WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure ignition is off and key is removed. Connect Side Impact Sensor (SIS) connector. Install Connector Position Assurance (CPA) clip. Install SIS. See SIDE IMPACT SENSOR (SIS) under REMOVAL & INSTALLATION. Install upper B-pillar trim panel.
- Install AIR BAG fuse (15-amp) in instrument panel fuse block. Install access panel on end of driver-side instrument panel. Staying well away from air bag modules, turn ignition on. Check system for proper operation. See SYSTEM OPERATION CHECK .