Conditions For Running DTC P1875

DTC will run under the following conditions:

• DTCs P0122, P0123, P0502, P0503, P0740, P0742, P0751, P0753, P0576, P0758, P1810, P1860 and P1870 are not present.
• Engine speed is greater than 450 RPM for 5 seconds.
• Engine is not in fuel cutoff mode.
• Vehicle speed is greater than 7 MPH.
• TP sensor angle is 17-50 percent.
• Engine torque is 50-400 ft. lbs.
• Engine vacuum is 0-105 kPa.
• Gear range is "D4".
• Shift solenoid performance counters are zero.
• Transmission fluid temperature is 68-266°F (20-130°C).