Circuit Description

TCC solenoid valve is a normally open exhaust valve that is used with the Torque Converter Clutch Pulse Width Modulation (TCC PWM) solenoid to control fluid acting on the converter clutch apply valve. The TCC solenoid valve attaches to the transmission case assembly extending into the pump cover. When grounded, energized, by the PCM, the TCC solenoid valve stops converter signal oil from exhausting. This causes converter signal oil pressure to increase and move the converter clutch apply valve against spring force and into the apply position. In this position, release fluid is open to an exhaust port and converter feed fluid fills the apply circuit. The converter feed fluid applies the TCC. When the PCM no longer provides a ground path, the TCC solenoid valve de-energizes and apply fluid exhausts, releasing the TCC. When the PCM detects a high TCC slip speed when the PCM commands the TCC on, then DTC P0741 sets.