Circuit Description

In conjunction with TCC PWM solenoid, TCC solenoid is used to control fluid flow acting on TCC valve. TCC valve controls apply and release of TCC. Solenoid is a normally open on/off device. Solenoid is attached to transmission case and extends into oil pump cover. PCM monitors TP sensor voltage, vehicle speed and other input devices in order to determine when to energize TCC solenoid. Ignition voltage is supplied directly to solenoid through fused circuit. PCM commands solenoid on or off through ground circuit. DTC P0740 is set if PCM detects a continuous open, short to voltage or short to ground in TCC solenoid circuit.