LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Adjustments >> BTSI & Park Lock System >> Adjustment (Column Shift "E" & "K" Bodies)

Adjustment (Column Shift "E" & "K" Bodies)

NOTE: Lock cylinder must be in RUN position when park lock cable is removed from or inserted into ignition switch inhibitor.

Turn lock cylinder to RUN position, depress brake pedal. Move shift lever out of Park position. Disengage locking button, pull cable away from solenoid until fitting starts to extend, compressing spring inside ball joint. Allow cable to move back.04-.08" (1-2 mm), engage locking button. See Figure. Recheck BTSI system. If system does not operate as specified, repeat procedure.

scientia non olet · About LEMON Manuals