LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Adjustments >> BTSI & Park Lock System >> Adjustment (Column Shift "C" & "H" Bodies)

Adjustment (Column Shift "C" & "H" Bodies)

  1. Turn lock cylinder to OFF position (not LOCK position). Place shift lever in Neutral. Unlock shift cable adjuster at transaxle end of shift cable (pull button up) to release cable tension.
  2. Lock shift cable adjuster (push button down). Place shift lever in Park. Ensure shift indicator is adjusted. Recheck BTSI system. If system still does not operate as specified, go to next step.
  3. Remove interlock solenoid by prying actuator end fitting from shift lever stud and prying adjuster block from bracket. Remove retaining clip. Compress adjuster block to release, slide away from solenoid as far as possible. See Figure. With shift lever in Neutral, reinstall solenoid. Move shift lever to Park, BTSI solenoid actuator is now properly adjusted. Reinstall adjustment retaining clip.
  4. Recheck BTSI system. If system does not operate as specified, repeat previous step.
scientia non olet · About LEMON Manuals