Section 3 (Manual Transmission - T56): Specifications
WARNING: This page is about a different variant/trim than selected.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Backup Lamp Switch | 27 N.m | 20 lb ft |
| Clutch Actuator Cylinder Bolt | 8 N.m | 71 lb in |
| Clutch Housing Bolt | 50 N.m | 37 lb ft |
| Control Lever Handle Bolt | 25 N.m | 18 lb ft |
| Gear Select/Skip Shift Solenoid | 40 N.m | 30 lb ft |
| Reverse Lockout Assembly Bolt | 18 N.m | 13 lb ft |
| Reverse Lockout Solenoid | 40 N.m | 30 lb ft |
| Shift Control Bolt | 18 N.m | 13 lb ft |
| Shift Control Closeout Boot Bolt | 2 N.m | 18 lb in |
| Shift Control Knob | 3 N.m | 27 lb ft |
| Transmission Bolt | 50 N.m | 37 lb ft |
| Transmission Drain/Fill Plug | 27 N.m | 20 lb ft |
| Transmission Mount Bolt | 48 N.m | 38 lb ft |
| Transmission Mount Nut | 105 N.m | 77 lb ft |
| Transmission Support Bolt | 90 N.m | 66 lb ft |
| Vehicle Speed Sensor Bolt | 10 N.m | 89 lb in |