LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Manual Transmission - T56) >> Repair Instructions >> Shift Control Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the shift control closeout boot. Refer to SHIFT CONTROL SHIFT CLOSEOUT BOOT REPLACEMENT .
  2. Remove the shift control bolts.
  3. Remove the control.
  4. Clean the old sealant from the housing and the shift control sealing surfaces.
    Fig 1: Removing Shift Control Bolts
    G01766674
scientia non olet · About LEMON Manuals