Code Enable Criteria

WARNING: This page is about a different variant/trim than selected.

For DTC to run, the following conditions must be met:

DTCs P0101, P0102, P0103, P0121, P0122, P0123, P0335, P0336, and P0742 are not set.
Vehicle speed is more than 10 MPH.
Engine load is less than 60 percent.
Engine misfire is detected and DTC P0300 is set.
Engine speed is less than 3200 RPM.

DTC will set when ABS system malfunction exists, preventing PCM from receiving rough road detection data.