LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical 5.7L V8) >> Removal & Installation >> Exhaust Manifold >> Installation

Exhaust Manifold: Installation

WARNING: This page is about a different variant/trim than selected.
  1. To install exhaust manifold(s), reverse removal procedure. Apply sealant to bolt threads.
    NOTE: DO NOT apply sealant to the first 3 threads of the exhaust manifold bolts. Apply a 1/4 inch wide band of Threadlock (12345493) or equivalent to bolt threads.
  2. Tighten nuts and bolts to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals