LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical 5.7L V8) >> Removal & Installation >> Cylinder Heads >> Removal (Right)

Removal (Right)

WARNING: This page is about a different variant/trim than selected.
CAUTION: Ensure engine is completely cold prior to removing cylinder head.
  1. Disconnect negative battery cable. Remove intake manifold, exhaust manifold and valve cover. See INTAKE MANIFOLD  , EXHAUST MANIFOLD  and VALVE COVERS 
  2. Remove rocker arms, and pushrods. See ROCKER ARMS & PUSHRODS  . Remove vapor vent pipe. See VAPOR VENT PIPE  . Remove cylinder head bolts and cylinder head.
scientia non olet · About LEMON Manuals