LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical 5.7L V8) >> Removal & Installation >> Cylinder Heads >> Removal (Left)

Removal (Left)

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect negative battery cable. Remove intake manifold, exhaust manifold and valve cover. See INTAKE MANIFOLD  , EXHAUST MANIFOLD  and VALVE COVERS  .
  2. Remove rocker arms, and pushrods. See ROCKER ARMS & PUSHRODS  . Remove vapor vent pipe. See VAPOR VENT PIPE  . Remove ground wires and bolts from rear of head. Remove power steering pump pulley using Pump Pulley Remover (J-25034-B). Remove power steering pump mounting bolts.
  3. Remove power steering pump assembly, and set aside. Remove power steering pump mounting bracket bolts and bracket. Remove cylinder head bolts and cylinder head.
scientia non olet · About LEMON Manuals