LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical 5.7L V8) >> Removal & Installation >> Cooling System Bleeding

Cooling System Bleeding

WARNING: This page is about a different variant/trim than selected.
  1. Fill radiator to base of fill neck. Fill coolant recovery reservoir to full HOT mark. Install coolant recovery reservoir cap. With radiator pressure cap removed, run engine until normal operating temperature is reached (radiator inlet hose hot).
  2. With engine idling, add coolant to radiator until coolant level reaches base of fill neck. Install pressure cap.
scientia non olet · About LEMON Manuals