LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Analog Instrument Panels) >> Symptom Tests >> Traction Off Indicator Always On

Traction Off Indicator Always On

WARNING: This page is about a different car, the 2000 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. If Anti-Lock Brake System (ABS) diagnostic system check has been performed, go to next step. If ABS diagnostic system check has not been performed, see diagnostic system check in appropriate ANTI-LOCK article in BRAKES.
  2. Turn ignition on. Using scan tool, check for Body Control Module (BCM) DTCs. If DTC B2597 is set, go to BCM DIAGNOSTIC SYSTEM CHECK under SYSTEM TESTS in BODY CONTROL MODULES - CORVETTE article. If DTC B2597 is not set, go to next step.
  3. Using scan tool, select IPC SPECIAL FUNCTIONS. Attempt to turn off traction off indicator using scan tool (indicator matches image on traction control switch). If traction off indicator turns off, go to next step. If traction off indicator does not turn off, go to step  5 .
  4. Replace Electronic Brake Control Module (EBCM). After repairs, go to diagnostic system check in appropriate ANTI-LOCK article in BRAKES.
  5. Replace IPC. See INSTRUMENT PANEL CLUSTER (IPC)  under REMOVAL & INSTALLATION. After repairs, go to diagnostic system check in appropriate ANTI-LOCK article in BRAKES.
scientia non olet · About LEMON Manuals