LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Analog Instrument Panels) >> Symptom Tests >> Abs Indicator Always On

Abs Indicator Always On

WARNING: This page is about a different car, the 2000 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: For circuit identification, see WIRING DIAGRAMS in appropriate ANTI-LOCK article in BRAKES.
  1. If Anti-Lock Brake System (ABS) diagnostic system check has been performed, go to next step. If ABS diagnostic system check has not been performed, see ABS DIAGNOSTIC SYSTEM CHECK in appropriate ANTI-LOCK article in BRAKES.
  2. Connect scan tool to DLC located under steering column. Select IPC SPECIAL FUNCTIONS and turn ABS indicator off. If scan tool turns ABS indicator off, go to next step. If scan tool does not turn ABS indicator off, go to step  4 .
  3. Replace Electronic Brake Control Module (EBCM). After repairs, see ABS DIAGNOSTIC SYSTEM CHECK in appropriate ANTI-LOCK article in BRAKES.
  4. Replace IPC. See INSTRUMENT PANEL CLUSTER (IPC)  under REMOVAL & INSTALLATION. After repairs, see ABS DIAGNOSTIC SYSTEM CHECK in appropriate ANTI-LOCK article in BRAKES.
scientia non olet · About LEMON Manuals