LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Analog Instrument Panels) >> Diagnostic Tests >> DTC B0521: Tachometer Signal Circuit Malfunction >> Description

DTC B0521: Tachometer Signal Circuit Malfunction: Description

WARNING: This page is about a different car, the 2000 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Powertrain Control Module (PCM) supplies Instrument Panel Cluster (IPC) with information on engine RPM. IPC receives engine RPM data from PCM and serial data line, but will only display data received from PCM.

DTC B0521 will set when IPC detects that PCM has sent engine RPM information of 7400 RPM for one second. IPC will display engine RPM at 7400 RPM. No driver warning message will be displayed.

If conditions for malfunction no longer exist, history DTC will clear after 50 consecutive ignition cycles. DTC B0521 will also clear when conditions no longer exist, or when IPC or scan tool is used to clear codes.

NOTE: If DTC B0521 is a history code, problem may be intermittent. Wiggle wires while performing the following test.