Frame Contact Hoist

WARNING: This page is about a different car, the 2003 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front Hoisting Points

Courtesy of GENERAL MOTORS CORP.

Important

The front hoist pads must not contact the rocker panels, the front fenders, or the floor pan.

Position the pads under the front frame rail reinforcements.

Fig 2: Identifying Rear Hoist Points

Courtesy of GENERAL MOTORS CORP.

Important

The rear hoist pads must not contact the rocker panels or floor pan.

Position the pads under the body side rocker pinch welds (1) or the rear crossmember support (2).