LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Engine Exhaust System) >> Repair Instructions >> Catalytic Converter Hanger Bracket Replacement (5.7L Engine) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Pontiac Firebird and 2002 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and suitably support the vehicle.
  2. Support the catalytic converter.
  3. Remove the catalytic converter hanger bolts.
  4. Remove the hanger from the bracket.
    Fig 1: Removing Hanger From Bracket
    G01731953Courtesy of GENERAL MOTORS CORP.
  5. Remove the rear axle torque arm bracket nuts.
  6. Remove the catalytic converter hanger bracket.
    Fig 2: Removing Catalytic Converter Hanger Bracket
    G01731954Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals