LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Engine Mechanical - 3.8L (On-Vehicle)) >> Repair Instructions >> Drive Belt Idler Pulley Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Pontiac Firebird and 2002 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the drive belt. Refer to Drive Belt Replacement .
  2. Remove the drive belt idler pulley bolt (1).
  3. Remove the drive belt idler pulley (2).
    Fig 1: Removing Drive Belt Idler Pulley
    G01728687Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals