LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Engine Mechanical - 3.8L (On-Vehicle)) >> Repair Instructions >> Drive Belt Idler Pulley Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Firebird and 2002 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the drive belt idler pulley (2).
    Fig 1: Installing Drive Belt Idler Pulley
    G01728688Courtesy of GENERAL MOTORS CORP.
  2. Install the drive belt idler pulley bolt (1).

    Tighten 

    Tighten the drive belt idler pulley bolt (1) to 50 N.m (37 lb ft).

  3. Install the drive belt. Refer to Drive Belt Replacement .
scientia non olet · About LEMON Manuals