LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Engine Mechanical - 3.8L (On-Vehicle)) >> Repair Instructions >> Crankshaft Front Oil Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Pontiac Firebird and 2002 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement .
  2. Use a screwdriver to pry out the crankshaft front oil seal. Use care in order to avoid damage to the seal bore or seal contact surfaces.
    Fig 1: Prying Out The Crankshaft Front Oil Seal
    G01728797Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals