LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Engine Controls - Removal & Installation) >> Sensors >> Fuel Tank Pressure Sensor >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2003 Cadillac Seville and 2003 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.

Remove the fuel sender access panel. See FUEL SENDER ACCESS PANEL  under FUEL SYSTEMS. Disconnect the Fuel Tank Pressure (FTP) sensor electrical connector. See Figure. Remove the FTP sensor. To install, reverse removal procedure.