Secondary Air Injection Pump: Installation
WARNING: This page is about a different car, the 2003 Cadillac Seville and 2003 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
- Install the lower AIR pump bolts/nuts into the cradle bracket and push down. Install the upper AIR pump to cradle bolt. Tighten the upper and lower AIR pump to cradle bolts to specification. See TORQUE SPECIFICATIONS .
- Reconnect the AIR pump electrical connector. Install the AIR outlet hose and pinch clamp to the AIR pump. Install the AIR inlet hose to the AIR pump. Lower the vehicle.