Removal & Installation
WARNING: This page is about a different car, the 2003 Cadillac Seville and 2003 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Remove the push in retainers securing the front air deflector to the vehicle. Remove the front air deflector. Loosen and lower the pinch clamp securing the Secondary Air Injection (AIR) pump outlet hose to the AIR pump. See Figure.
- Remove the clamps securing the AIR pump outlet hose to the bank 2 intermediate pipe/hose and the crossover pipe/hose. Remove the AIR pump outlet hose. To install, reverse removal procedure.