LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Automatic Transmission Removal & Installation) >> Removal & Installation >> Torque Converter Cover >> Removal (5.7L)

Removal (5.7L)

WARNING: This page is about a different car, the 2002 Pontiac Firebird and 2002 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and suitably support the vehicle.
  2. Remove the starter, if servicing the right side transmission cover only. See STARTERS - CAMARO & FIREBIRD article in STARTING & CHARGING SYSTEMS. See Fig 1.
  3. Remove the right side transmission cover bolt. See Fig 1.
  4. Remove the right side transmission cover.
  5. Remove the left side transmission cover bolt. See Fig 2.
  6. Remove the right side converter cover.
Fig 1: Removing/Installing Right Side Torque Converter Cover (5.7L)
G00107708Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing/Installing Left Side Torque Converter Cover (5.7L)
G00107709Courtesy of GENERAL MOTORS CORP.