Parking Pawl: Installation
WARNING: This page is about a different car, the 2003 Cadillac Seville and 2003 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
Place the pawl in the case slot. See Fig 1 . Attach the spring to the pawl. Insert the pivot pin through the spring and pawl. See Fig 2 . The hook end of the spring locates on the case and the square end on top of the parking pawl. Install the pivot pin using a mallet. Install the park gear. See PARKING GEAR . Install the lower valve assembly and the bottom pan. See LOWER CONTROL VALVE BODY ASSEMBLY .