DTC P0336: Crankshaft Position Sensor Circuit Performance: Description
WARNING: This page is about a different car, the 2002 Pontiac Firebird and 2002 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
The Crankshaft Position (CKP) sensor signal indicates the crankshaft speed and position. The CKP sensor is connected directly to the Powertrain Control Module (PCM), and consists of the following circuits:
- The 12-volt reference circuit.
- The low reference circuit.
- The CKP sensor 1 signal circuit.
- The CKP sensor 2 signal circuit.
The CKP sensor shares power supply and low reference circuits with the Camshaft Position (CMP) sensor.