LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Engine Control System - Removal & Installation & Overhaul) >> Engine Sensors & Switches >> Intake Air Temperature Sensor >> Removal & Installation (3.8L)

Removal & Installation (3.8L)

WARNING: This page is about a different car, the 2002 Pontiac Firebird and 2002 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect Intake Air Temperature (IAT) sensor connector. IAT sensor is located in air intake duct. Carefully remove the IAT sensor (snaps into place). To install, reverse removal procedure.

scientia non olet · About LEMON Manuals