Diagnostic Aids
WARNING: This page is about a different car, the 2002 Pontiac Firebird and 2002 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Before you service the PCM, remove any debris from the PCM connector surfaces. Inspect the PCM connector gaskets when you diagnose or replace the PCM. Ensure that the gaskets are installed correctly. The gaskets prevent contaminate intrusion into the PCM.
For any test that requires probing the PCM or probing a component harness connector, use the Connector Test Adapter Kit (J 35616-A). Using this kit prevents damage to the harness and component terminals.
- The scan tool offers 3 modes of AIR output controls: the AIR pump relay, the AIR solenoid, and the AIR system.
- For an intermittent condition, see INTERMITTENT CONDITIONS under SELF-DIAGNOSTIC SYSTEM.