Removal (Camaro & Firebird)
WARNING: This page is about a different car, the 2002 Pontiac Firebird, 2002 Chevrolet Corvette, and 2002 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
Raise and suitably support the vehicle. Remove the reverse lock-out solenoid harness connector. Place a drain pan under the transmission, in case any fluid drips out. Remove the reverse lock-out solenoid using Gear Select/Reverse Lock-out Solenoid Socket (J-41099). See Figure . Remove the reverse lock-out assembly bolt. Remove the reverse lock-out assembly.